Height: 1210mm

Width: 515mm

Depth: 535mm

Pan Height: 415mm

Download Dimension Sheet (PDF)

• Installer must carry out a due care inspection to make sure a correct product has be chosen and product isn’t damaged before the installation, any defect should be reported immediately.
• Installed by Suitably qualified competent person.
• Ceramic Pan should be cleaned regularly with warm soapy water. we strongly recommend that the instructions on the bottle of your chosen cleaner are followed. We advise against the practice of leaving strong cleaners or bleach in ceramic products overnight since the glazed surface may be damaged.
• Wooden seat is manufactured veneered MDF (medium density fireboard). The surface is varnished, it should be dried immediately after use with a soft cloth. Water should not be allowed to pool on the wooden surface for a long period. For cleaning use a soft damp cloth. Do not use scouring powder, scourers or abrasive cleaners. The polished surface of the wood can be preserved using a proprietary wax polish. Always read the instructions on the packaging of your chosen.
• Stainless steel pipe should be cleaned regularly to maintain the original surface appearance, to prevent corrosion and to maintain hygienic conditions. Regular cleaning with warm soapy water or with mild detergent is usually sufficient, followed by rinsing and, if desired, drying with a soft cloth. The use of strong acids and disinfectants should be avoided. If proprietary cleaners are used, always read and follow the instructions on the bottle. If the steel has become extremely dirty – perhaps following a period of neglect – proprietary stainless steel cleaners may have to be used. Do not use steel wool or steel wool soap pads since these may leave rust spots.

Ceramic products are guaranteed for twenty years from date of purchase.

Cistern fittings are guaranteed for two years from date of purchase.

Wooden seat is guaranteed for two years from date of purchase.

Stainless steel pipe is guaranteed for two years from date of purchase.

Guarantee must be validated with original proof of purchase.
The guarantee is valid to original purchaser only and is not transferable. Product guarantee does not cover damage or defects caused by:

– Incorrect / poor installation.
– Poor service / maintenance practice.
– Damage to surface finish caused by inappropriate cleaning products. – General wear and tear.
– Product that has been modified or altered in any way.

The guarantee requires that this product be used in the manner for which it was intended and that it is installed & maintained in accordance with the fitting instructions.

In the unlikely event that this product should fail during the guarantee period we will either replace the faulty part or the complete unit as appropriate.

Failure to follow the terms outlined above will invalidate this guarantee.